A new type of spray freeze granulator, with a processing capacity of 1.2L/H, fast speed;
Small size, less than 1 square meter;
The dried material is granular, with uniform particle size distribution, no need to pulverize again, and the solubility is very good;
It is suitable for the drying of heat-sensitive materials, and the dried materials retain their original characteristics

Compared with the traditional spray dryer, it can obtain samples with porous surface, high solubility, good dispersibility, and low agglomeration. It is also suitable for heat-sensitive materials and can maintain the activity of the materials to the greatest extent.

Compared with the traditional freeze dryer, the spray freezing technology adds a spray process. The material is atomized before freezing. At the moment of atomization, it encounters low temperature and freezes into ice crystals, which greatly increases the material’s capacity. YC-01 laboratory spray freeze granulator has a rated processing capacity of 1.2L/H, and the processing speed is fast; small in size, covering an area of ​​less than 1 square meter, with a hub; body is made of SUS304 stainless steel, color touch screen, PLC control, easy to operate;

1. The spray freeze granulator capacity is 300-1200mL/h, which can freeze samples continuously;
2. It is suitable for drying and granulating heat-sensitive materials, and the dried materials retain their original characteristics;
3. The material is quickly cooled by liquid nitrogen;
4. Insulation jacket for spray freezer, spray liquid crystallize quickly;
5. The dried material is granular, with uniform particle size distribution, no need to pulverize again, and the solubility is very good;
6. Narrow particle size range distribution, 20μm-200μm can be selected;
7. Liquid nitrogen consumption: 10-20L/h;
8. Color touch screen operation, PLC control

Product	Spray Freezer Granulator
Model	YC-01
capacity of spray freezing	Max.1200mL/h
pump flow range	Max.1500mL/h
Power	220V 10A
Freezer compartment	SUS304 stainless steel
Peristaltic pump pipe diameter	4×6mm
environment temperature	5～35℃
Freezing temperature	below -80°C
Body material	SUS304 stainless steel
Liquid nitrogen consumption	10-20L/h
Particle size range	5μm-200μm